Shanghai Laijie Machinery Co.Ltd
Shanghai Laijie Machinery Co.,Ltd Your professional washing solution expert ! Provide a highly efficient, environmentally friendly, energy-saving one-stop solution.
Add to Cart
Hotel Fabric Automatic Laundry Folding Machine with 3300mm Folding size
Product advantage of Hotel Fabric Automatic Laundry Folding Machine with 3300mm Folding size :
1. START/STOP button pause and restart operation without interrupting folding in progress.
2. Heavy-duty motor with overloading protection.
3. Heavy duty Belt and chain drive.
4. Excellent powered static eliminator bar
5. Individual air pressure regulators with gauge and auto-drain feature.
6. Full safety guard, interlock and stop buttons
Product specification of Hotel Fabric Automatic Laundry Folding Machine with 3300mm Folding size :
| Model | ZD3000 | ZD3300 |
| Max Folding LxW(mm) | 3000x3000 | 3300x3000 |
| Max Speed(m/min) | 50 | 50 |
| Layers(layer) | 5 | 5 |
| Air Pressure(Mpa) | 0.7 | 0.7 |
| Rated Input Power(kw) | 2.25 | 2.25 |
| Dimension(mm) | 4116x2800x1760 | 4416x2800x1760 |
| Total Weight(kg) | 1780 | 1830 |
Troubleshooting:
1. Common failures: slow heating of the roller roller
(1), cause: low steam pressure .Solution: increase steam pressure
(2), cause: there is water inside the main ironing roller, and the drain valve is not working properly.
Solution: repair or replace the steam trap and drain the main roller.
(3) the damage of the siphon tube or the wrong position .Solution: maintenance siphon
2. Common failures: the fabric is often damaged in ordinary times.
(1), cause: the ironing belt is too tight Solution: adjust the tightness of the ironing belt
(2), ironed buckles have burr. Solution: repair burr
3, common faults: the machine works irregularly in the work process, often run.
(1), cause: ironing belt on both sides of the differences Solution: replace the ironing belt
(2), cause: the springs on the tension shaft are not adjusted on either side. Solution: re adjust the spring tension of the tension shaft.
(3), cause: the bending of the conveyer belt axis . Solution: replace the conveyor belt shaft
(4) the level of the machine is not adjusted well .Solution: adjust the level of the machine
4, common fault: non rotation according to RUN key roller
(1), cause: loose connection between inverter and motor. Solution: fastening connection
(2), frequency converter is not output Solution: remove the failure of the inverter and run again
